EasyTrans 15″ x 15″ 8 IN 1 Heat Press (Model# HP8IN1-4) LCD Controller Operation
 |
Turn on the power switch, control panel display illuminates like picture |
 |
Touch “SET” into “P-1”, here you can set TEMP. with “▲” and “▼” reach to desired TEMP. |
 |
Touch “SET” into “P-2”, here you can set TIME. with “▲” and “▼” |
 |
Touch “SET” into “P-3”, here you |
 |
Touch “SET” into “P-4”, here you can set stand-by time with “▲” and “▼” reach to desired value |
 |
Finally touch “SET” to complete all setting, so heat press start to heating up. |
 |
It reads OFF on the display and heat press starts to cool down. Stand-by only happens when machine is not in use and reaches to P-4 set minutes. If you want to use heat press, please wake up heat press by touch any button on the control display. |
||
User Tips
● Please turn off the machine and wait it to be cold when you are going to change a heat plate
● Please make sure that machine is placed on a sturdy and even location
● Swing-away models need sufficient space, please make sure clear space from its right and the back .
● Maybe the machine you’ve carried is different from above drawing, Please contact us if you need any help.
● P- is temperature scale in °C or °F, which is usually not illuminated on the display. Please contact our support for help if you need switch between °C and °F.